KDF Technologies is a leading manufacturer of PVD (physical vapor deposition) capital equipment for microelectronics, medical, thin film circuits, and semiconductor markets. Located in Northern NJ we serve a variety of industries and companies from startups to Fortune 500 organizations.

Overview of Responsibilities:
The Applications Technician will support thin film process development, equipment operation, and laboratory activities. This hands-on role will focus on operating deposition systems, conducting experiments, collecting process data, and maintaining laboratory equipment to support R&D, engineering, and customer projects.

Key Job Elements:

Operate and monitor PVD deposition systems, including magnetron sputtering equipment
Prepare substrates, fixtures, and deposition materials for experiments and demonstrations
Execute thin film deposition runs according to established procedures and engineering instructions
Collect, document, and organize process parameters and experimental results
Perform routine thin film characterization using laboratory metrology equipment such as profilometers, reflectometers, ellipsometers, and other measurement systems
Assist engineers in developing and optimizing thin film deposition processes
Support customer demonstrations, source inspections, and factory acceptance testing activities
Maintain laboratory equipment, deposition systems, targets, fixtures, and consumables
Troubleshoot routine equipment and process issues and escalate complex problems to engineering personnel
Ensure laboratory cleanliness, organization, and compliance with safety procedures
Maintain accurate electronic records, test logs, and laboratory documentation
Follow all company policies, procedures, and safety requirements
Support special projects
Other duties as assigned

Qualifications:

Required

Associate degree or Technical Certificate in Materials Science, Engineering Technology, Physics, Electronics Technology, Manufacturing Technology, or a related field. Equivalent experience may be considered
1–3 years of hands-on laboratory, manufacturing, semiconductor, vacuum systems, or thin film deposition experience preferred
Basic knowledge of vacuum technology and thin film deposition processes
Experience operating laboratory equipment and following experimental procedures
Strong mechanical aptitude and troubleshooting skills
Ability to accurately record data and prepare test reports
Proficiency with Microsoft Office applications
Strong organizational skills and attention to detail
Ability to work independently and as part of a team
Ability to safely work around vacuum and high-voltage equipment following proper procedures

Preferred

Experience with PVD sputtering systems.
Familiarity with thin film metrology tools such as: Profilometers
Ellipsometers
Reflectometers
Residual Gas Analyzers (RGA)

Benefits we offer to enhance your lifestyle:

Company-paid medical and dental insurance
401k plan
Paid vacations
Sick time

KDF Technologies, LLC is a limited liability company. KDF Technologies, LLC is an Equal Opportunity Employer. Our salary ranges are determined by role, level, and location. Within this range, individual pay is influenced by various factors, including job-related skills, experience, qualifications, work location, etc. The compensation range for this role is 50000 to 75000 per year. Above job advertisement is intended to provide general nature and level of work performed by employees within this classification and does not constitute an exhaustive list of all duties and responsibilities that may be required.

Apply for this position

* Required fields

First name*

Last name*

Email address*

Location

Phone number*

Resume*

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or paste resume

Paste your resume here or attach resume file

Desired salary*

Are you legally authorized to work in the United States for any employer?*

Will you now or in the future require sponsorship for employment visa status (e.g., H-1B, TN, etc.)?*

This position is located at our Rockleigh, NJ location and will require working on-site regularly.

Are you able to work on-site?*

The following questions are entirely optional.

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Gender

Race/Ethnicity

Invitation for Job Applicants to Self-Identify as a U.S. Veteran

A “disabled veteran” is one of the following:
- a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
- a person who was discharged or released from active duty because of a service-connected disability.
A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Veteran status

I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER

Voluntary Self-Identification of Disability

Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 05/31/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury

Please check one of the boxes below:

YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST
NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST
I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.


Name	Date

Human Check*

Apply for this position

This website uses cookies and other analytics technologies.